fast pcb assembly | Hitech Circuits Co., Ltd.

The role and difference of solder mask and solder paste layer

The impact of many projects on solder masks and solder layers is unclear. It is to open the window itself, but only provides the paste layer. There is no solder layer. Some board engineers don't look at the paste layer (note that this is used). This is a useless layer for the plant's engineers and can cause window leaks. The following is a brief introduction to their differences. The solder layer is used to control the area where the green oil (white oil) is not covered when the board is fabricated. For example, the position of the pad, [...]

Andy Liu2019-09-16T17:08:31+00:00Categories: Blog, PCB knowledge|Tags: Aluminum based PCB, electronic board assembly, fast pcb assembly, Flex printed circuit board, Heavy Copper PCB|

An Overview of Common Electrical Components Used in PCBA

Printed Circuit Boards (PCBs) are composed of a wide range of electrical elements. The most decisive elements that are utilized in PCB assemblies are resistors, capacitors, diodes, and transistors. This blog is meant to familiarize you with these critical elements that contribute largely in the successful electronics assembly manufacturing of PCBs. An Overview of the Four Vital PCB electronics Components Let us understand the role of resistors, capacitors, diodes, and transistors in a PCB. Resistors, these elements play a crucial role in regulating the current flow to a safe limit. Resistors perform a vital task of providing only the [...]

Andy Liu2019-09-03T10:57:14+00:00Categories: Blog, Industry News|Tags: circuit board assembly, component sourcing for pcb assembly, electronic pcb assembly, fast pcb assembly, smt pcb assembly|

A Glossary Of Terms For The PCB Manufacturing Process

Your life practically runs on printed circuit boards (PCBs) and you may not have even known it. These circuit boards are in nearly all computational electronics, from smartphones to digital clocks. It works by routing electric signals through electronics, essentially telling the electricity where to go and bringing electronics to life. As the PCB manufacturing process and function of PCBS are rather complicated, there is a whole slew of relevant terms to know. Analog Circuit: A type of circuit in which the output varies as a continuous function of the input. This is in contrast with a digital circuit, [...]

Andy Liu2019-08-01T12:04:19+00:00Categories: Blog, PCB knowledge|Tags: board assembly, electronic board assembly, fast pcb assembly, PCB Assembly, Quick turn PCBA prototype|

How can we identify Integrated Circuits

Inspect the surface of the component body If a used part has been polished to make it look new, there may be tiny scratch patterns on the surface when observed under a magnifier. If it is covered up with paint on the surface, it will look bright and have no plastic texture. Inspect the printed text High-quality producers use laser printers to print the text silk-screen. It has a clear appearance, is non-conspicuous, and is difficult to erase. Typically, the text on refurbished chips is printed fuzzy and is not as sharp. You may find that the edges of [...]

Andy Liu2019-05-12T17:07:29+00:00Categories: Blog|Tags: board assembly, China pcb assembly manufacturer, fast pcb assembly, PCB Assembly, Quick turn PCBA prototype|

Why are Rigid Flex PCBs Economical?

There are several great advantages of using rigid-flex PCBs, not just from a technical standpoint, but also from a cost-saving point of view. Ability to Merge Designs With rigid-flex printed circuit boards, you are able to merge multiple PCBs into one design as only one design is needed for a rigid-flex. Usually, with rigid PCBs, multiple designs and cable assemblies are required for the production. As such, rigid-flex circuit boards can be more expensive to manufacture as they may require multiple designs and cable assemblies to facilitate the production. Reduced Space Requirements As rigid-flex PCBs utilise thin and [...]

Andy Liu2019-04-24T15:36:20+00:00Categories: Blog|Tags: fast pcb assembly, flexible circuit capability, Multi-layer printed circuit board, Rigid Multilayer PCB, Rigid-flex PCB.|

The Benefits of PCB Assembly Automation

With the rapid development of technology, printed circuit boards are now much easier to mass produce and assemble due to automation and machines. Here are a few benefits of automated assembly: Lower Overall Cost Using automated PCB assembly means that you can expect lower overall costs. Many SMT assemblers use exclusive software to assemble the circuit board digitally before actual production. This is to reduce the risk of errors and delays. During this process, PCB designers can fix any design errors which then removes possible issues when production begins. The use of automated assembly also means that fewer [...]

Andy Liu2019-04-13T10:37:34+00:00Categories: Blog|Tags: electronic board assembly, fast pcb assembly, PCB Assembly, printed circuit Board Assembly, smt pcb assembly|

PCB REVERSE ENGINEERING–From Hitech Circuits Co., Limited

PCB Reverse Engineering, also known as PCB Cloning or PCB Copy.The PCB copy ‘s work cloning the circuit board, producing samples, replacing components, making BOM list, derived schematic. PCB Reverse Engineering using Reverse Engineering technology onto the PCB which was designed and manufactured by others, it is to use PCB Board related software to copy someone else’s printed circuit board and then manufacture the pcb circuit board by yourself.With the PCB Reverse Engineering technology development, To the wide sense that PCB Reverse Engineering not only include PWB file extraction, PCB Cloning and PCB Copy and other related technical aspect, but [...]

Andy Liu2019-03-12T12:14:30+00:00Categories: Blog|Tags: component sourcing for pcb assembly, fast pcb assembly, flexible circuit capability, heavy copper printed circuit board, High density Printed circuit board|

SMD Components-PCB Assembly & SMT Assembly & Circuit board Assembly

For many years now, the hybrid electronic industry has been using the art of reflow soldering and refining it. Therefore, one cannot consider reflow soldering a new manufacturing process. The advent of Surface Mount Technology (SMT) and lead-free soldering has further expanded the methods and techniques the industry uses for reflow soldering. Goals of Reflow Soldering of Circuit board Assembly Reflow soldering aims to satisfy two basic goals. The first goal is more traditional, including: Achieving maximum flexibility in allowing soldering of a large number of components while minimizing the changeover time.Achieving uniform, durable, and effective solder joints The second [...]

Andy Liu2019-03-12T12:14:30+00:00Categories: Blog, Industry News, PCB News|Tags: circuit board assembly, electronic board assembly, electronic pcb assembly, fast pcb assembly, PCB Assembly|

Electronic board printed circuit board assembly(PCBA)

Technical description Production type: Multilayer layer Material: FR4 S1000-2 Application filed: Communication equipment Layer/thickness: 6L/1.6mm Surface treatment: Gold plating Line space/width: 3/3mil Minimum hole diameter: 0.3mm Technical feature:impedance control

Andy Liu2019-03-12T12:14:30+00:00Categories: Low-Volume Electronics Assembly manufacturing, PCB Assembly|Tags: circuit board assembly, electronic board assembly, fast pcb assembly, High density Printed circuit board, PCB Assembly|

China customized fr4 prototype pcb assembly

Technical description Product type: prototype pcb assembly Material: Fr4 1000-2 Application filed: Data Acquisition Layer/thickness: 4L/0.8mm Surface treatment: ENIG Line space/width: 0.26/0.23mm Minimum hole size: 0.45mm Technical Feature: impedance control Components: As Bom list

Andy Liu2019-03-12T12:14:30+00:00Categories: PCB Assembly, Printed Circuit Board Assembly Services|Tags: China pcb assembly manufacturer, custom pcb assembly, electronic board assembly, electronic pcb assembly, fast pcb assembly, fast pcb prototype, pcb assembly china, rapid pcb assembly prototype|